CLAN GT4 CEMENTITIOUS GROUT 1000ml
Clan GT4 is a shrinkage compensated fibre reinforced grout, ideally suited for use in conjunction with stainless steel structural fixings and our range of crack control ties. It can be applied directly into masonry or concrete voids using a hand operated grout pump or refillable cartridge. It can also be used for grouting rigid joints between concrete elements.

Clan GT4 is a ready mixed powder composed of highly resistant cements, selected aggregates, special additives and synthetic fibres. Once mixed with water Clan GT4 becomes a thixotropic mortar with very high flexural and compressive strength and high adhesion qualities to steel, concrete or masonry components.


TECHNICAL DATA
Supplied in 5Kg buckets Yield 2.7 Litres
Description Clan GT4 cementitous grout is a dry packed blend of Portland Cement to BS 1200 and additives to provide water resistance, thixotropy, workability and colour.
Joint Widths Normal 5mm - 15mm (25mm Maximum)
Material Classification Class 1 mortar as defined in BS 5628
Performance at 200C Pot Life 45 Minutes
Initial Set 2.5 Hours
Strength 24 Hours 20N/mm2
7 days 42N/mm2
WSR 0.17 L/Kg
Bulk Density 1600 Kg/M3
FWD 2050 Kg/M3
Water Resistance Initial Surface Absorbtion
ISAT after 10 Min 0.53ml/M2/Sec
ISAT after 30 Min 0.45ml/M2/Sec
ISAT after 60 Min 0.26ml/M2/Sec
Chloride Less than 0.002%. Complies
with DoT specification 2061
Sulphate Less than 0.002%. Complies
with DoT specification 2061

STORAGE
Store in a dry area. Do not expaoe to sunlight.

HEALTH AND SAFETY
Clan GT4 is classed as an irritant. Wear suitable protective clothing such as gloves and overalls. On contact with skin wsh off immediately with plenty of soap and water. If a rash appears seek medical advive.

IMPORTANT
This information is based on Clan Products own experience, research and testing and is believed to be reliable and accurate. However as Clan Products cannot know the varied applications of its products no warranty as to the fitness or suitability of its products.