CONCRETE REPAIR & STRENGTHENING

Hand-Applied Mortar Repair

Localised concrete reinstatement using compatible repair mortars, retaining the sound concrete around every repair.

Clan operative applying repair mortar by hand to a concrete balcony edge
TARGETED REPAIR

Rebuild the defect, retain the sound concrete.

Hand-applied mortar repair reinstates localised areas of damaged concrete using a compatible repair mortar applied and compacted by hand or trowel. It is an established concrete repair method for vertical, overhead and small localised repairs where the geometry and specified material suit hand application.

Clan undertakes hand-applied concrete repairs across North West England on soffits, beams, columns, walls, slabs, edges and balconies. The method allows unsound material to be removed and the original profile rebuilt while retaining the surrounding concrete that remains sound.

Hand-applied repair mortar being finished on a concrete element
REPAIR APPLICATIONS

Hand-applied mortar repair applications & asset benefits

01
Defect

Localised spalling or delamination

Repair function
Removes unsound concrete and rebuilds the affected section with specified repair mortar.
Asset benefit
Restores cover, profile and surface integrity while retaining sound surrounding concrete.
02
Defect

Exposed or insufficiently protected reinforcement

Repair function
Reinstates concrete cover after specified steel preparation and treatment.
Asset benefit
Helps protect the reinforcement and restores the intended section.
03
Defect

Damaged soffits, beams, columns or edges

Repair function
Places and compacts mortar on vertical or overhead faces.
Asset benefit
Enables controlled local repair without recasting a larger sound area.
04
Defect

Broken balcony edges, arrises and local impact damage

Repair function
Reforms the required geometry and finish.
Asset benefit
Restores safe edges and prepares the area for any specified protective system.
05
Defect

Local voids or defective previous patches

Repair function
Removes unsuitable material and reinstates a compatible repair.
Asset benefit
Addresses the local defect without unnecessary wholesale replacement where conditions permit.
DESIGN & SUBSTRATE

What determines repair suitability

  • The cause, extent and depth of the deterioration.
  • The condition and strength of the remaining concrete.
  • Reinforcement condition and required cover.
  • Repair location, orientation, geometry and access.
Concrete repair works in progress
  • Exposure to water, carbon dioxide, chlorides and freeze-thaw cycles.
  • Required strength, shrinkage, movement, finish and curing conditions.
  • The application limits and performance classification of the specified mortar.
  • Any protective coating, corrosion-control or strengthening system forming part of the wider repair strategy.

Larger-volume, deeper or congested repairs may require flowable, recast or spray-applied systems instead of hand application.

CONTROLLED REPAIR

From breakout to a protected, finished repair

01

Assess

Establish the cause, extent and depth of the deterioration.

02

Break out

Remove unsound concrete back to a sound, prepared substrate.

03

Treat steel

Prepare and treat exposed reinforcement as specified.

04

Apply

Place and compact the specified repair mortar by hand or trowel.

05

Cure & protect

Cure as specified and apply any protective system required.

Our clients
TECHNICAL QUESTIONS

FAQ'S

When is hand-applied mortar repair suitable?

It is commonly suited to localised vertical, overhead and small-area concrete repairs that can be properly prepared, filled and compacted by hand. Repair depth, reinforcement congestion, access and the specified mortar's application limits determine suitability.

Does every area of spalled concrete need complete replacement?

No. The repair scope should distinguish unsound concrete from material that remains serviceable. Where local repair is appropriate, hand-applied mortar can reinstate the affected area while retaining sound surrounding construction.

Can hand-applied concrete repairs be completed in occupied buildings?

Yes, where access and project controls permit. Clan has delivered phased concrete repairs in occupied housing, live university buildings and a healthcare setting. Noise, dust, protection, sequencing and working hours must be planned for the asset and its users.

Discuss a Hand-Applied Concrete Repair Project